Read + Write + Report
Home | Start a blog | About Orble | FAQ | Sites | Writers | Advertise | My Orble | Login

Aston Martin V12 Vantage RS gallery

December 13th 2007 21:45
Aston Martin V12 Vantage RS


As earlier reported by Adrian on ZCars, the Aston Martin V12 Vantage RS is set to become the flagship model of the Aston Martin range.


Based on Aston Martin's critically acclaimed V8 Vantage coupe, the V12 Vantage RS is powered by a 6.0-litre V12 engine developing 441kW at 6250rpm and peak torque of 690Nm at 5000rpm. Weighing in at a relatively featherweight kerb mass of 1600kg, the flagship Aston boasts a power-to-weight ratio of over 375bhp per tonne, making it the fastest accelerating road car ever built by the company; capable of reaching 62mph (100km/h) from rest in 4.0 seconds and 100mph (160km/h) in just 8.5 seconds.

Had this been developed in time, we are sure it would have been James Bond's choice in the upcoming 007 movie rather than the DBS!

Aston Martin V12 Vantage RS

Aston Martin V12 Vantage RS


Aston Martin V12 Vantage RS

Aston Martin V12 Vantage RS engine

Aston Martin V12 Vantage RS interior

Aston Martin V12 Vantage RS interior


The Official Aston Martin Press Release:

Aston Martin Unveils Performance Concept Car

At the official opening of Aston Martin's first ever dedicated design centre in Gaydon, Warwickshire, on Tuesday 11 December, Dr Ulrich Bez, Chief Executive Officer, thrilled an audience of more than seven hundred VIP guests with a surprise unveiling of a stunning new 600bhp performance concept car; the V12 Vantage RS.

The V12 Vantage RS concept is based on Aston Martin's critically acclaimed V8 Vantage coupe, but the company's design and engineering team have fully exploited the design flexibility of their unique VH architecture and the motor sport development of their 6.0 litre V12 engine to create a dramatic and production feasible concept car focussed on extreme performance and dynamics.

In a speech to the assembled guests, Ulrich Bez said: "Over the last five years, we have established a reputation for presenting fully functional, feasible concept cars, and the V12 Vantage RS is no exception. We will listen with interest to feedback on this concept and, as ever, if there is sufficient demand then we will seriously consider a low volume production run in the near future with a price that will reflect the exclusivity of the car.

"With our dedicated production facilities, our own engine plant, our own unique vehicle architecture and now a dedicated design studio, we have the ideal framework to bring new models such as this to market and to further establish Aston Martin as the ultimate independent luxury sports car company."

Although the 600bhp power output of the V12 Vantage RS concept will be the focus of attention, just as significant is the level of weight reduction achieved by Aston Martin's engineering team. With a kerb weight of less than 1600kg, the RS concept underlines Aston Martin's continued commitment to intelligent use of materials and weight reduction as a means of achieving improved efficiency and performance. In common with the recently launched DBS, the bonnet and trunk lid are moulded in carbon fibre and the concept also adopts motor sport-inspired carbon ceramic brake discs.

The subtly aggressive exterior appearance is driven by function. The dramatic bonnet louvres extract air from the fully ducted cooling pack and the trunk lid features a deployable spoiler that rises automatically at high speeds to increase rear down force. The front bumper features cooling ducts for the carbon ceramic brakes and a carbon fibre splitter to balance down force.

Director of Design, Marek Reichman, commented: "Much of Aston Martin's recent success has come from the ability of our designers and engineers to work hand-in-hand to optimise form and function. Our new dedicated design centre will take this process to a new level and I am delighted that the V12 Vantage RS is the first car to stand on the turntable in the studio."

The 600bhp 6.0 litre engine featured in the V12 Vantage RS concept has benefited directly from the race development of this acclaimed power unit. It features a dry sump lubrication system, tuned length exhaust manifolds, forged pistons and steel con-rods, revised lift and duration camshafts and modified cylinder heads. Peak power is achieved at 6250rpm and peak torque of 690Nm is at 5000rpm.

With a power-to-weight ratio of over 375bhp per ton, the V12 Vantage RS concept is the fastest accelerating road car ever built by the company, capable of reaching 62mph (100km/h) from rest in 4.0 seconds and 100mph (160km/h) in just 8.5 seconds.

The unveiling of the Aston Martin V12 Vantage RS concept concludes a remarkable year of new product announcements for the British manufacturer. In the last twelve months the company has launched two of the most eagerly anticipated sports cars of the year – the DBS and Vantage Roadster – and announced details of the DB9 LM and V8 Vantage N400 special editions which celebrate the company's racing successes at Le Mans and the Nϋrburgring. All of these models now join the award-winning V8 Vantage, DB9 and DB9 Volante models in production at the company's Gaydon headquarters.


[Source: Aston Martin]




49
Vote
   


Porsche Carrera GT by Edo competition


German Ferrari and Porsche aftermarket tuner, Edo Competition, has made the ultimate Porsche - the Carrera GT - even more individualised and exclusive with a host of customised upgrades including a power bump for the 5.5-litre V10 from a 'standard' 450kW to 567kW!

The Edo competition upgrade offers three stages of tuning that increases the performance of the Carrera GT from 450kW to 493kW (Stage 1), 526kW (Stage 3) and 567kW (Stage 3).

Porsche Carrera GT by Edo competition


These increases come courtesy of a modified intake system, re-calibrated engine controls, high flow air filters and new header catalytic converters. To round off these power packages, Edo competition delivers a full stainless steel performance exhaust system featuring electronic programmable butterfly-valve control.

Acoustics are anything but neglected; the sport exhaust system, which is available in two different sound levels, produces a wonderful deep and sonorous tone, clearly announcing the approach of an Edo competition Carrera GT.

The aerodynamics, suspension and wheels of the Porsche have all been upgraded to deliver reductions in weight and to enhance overall driving dynamics.

http://www.zcars.com.au/2008-ford-falcon-official-spy-photos/

http://www.zcars.com.au/2008-ford-falcon-official-spy-photos/

Edo competition Porsche Carrera GT engine

Edo competition Porsche Carrera GT interior


The Official Edo Competition Press Release:

A fiery passion that nobody can escape

Introduced at the Frankfurt International Motor Show two years ago, the Carrera GT was the undisputed highlight of the event.

Today, Carrera GT owners have the opportunity to make this expensive and rare Porsche even more sporting and exclusive than it already is.

This unbelievable excess of power and individuality is made by edo competition Motorsport!

Specifications

Engine V10
Power 670 hp / (492kW) at 8,100 rpm
Max. torque 640 Nm (472 ft-lb) at 5,800 rpm

Performance

Top speed < 345 km/h (214 mph)
0 - 100 km/h (0 – 62 mph) est. 3.4 s

Features

Engine Stage 1
Power increase to 670 hp/640 Nm (472 ft-lb), V-max < 345 km/h (214mph)

Modified intake system
High flow air filters
ECU recalibration
New header catalytic converters
New sports exhaust system with electronic programmable butterfly-valve control (available in 2 different sound levels). This cat-back performance exhaust system was developed on the dyno.
The result is a power increase of 19 kW (25 hp) and a 30 Nm (22 ft-lb) increase in torque. A deep sonorous tone and a weight reduction of 18 kg (40 lb) are additional benefits of this stainless steel exhaust system. Vehicle will be tested on dynamometer.

Engine Stage 2
Power increase to 715 hp/660 Nm (487 ft-lb), V-max > 355 km/h (221 mph)

Modified intake system
High flow air filters
ECU recalibration
Modified cylinder heads
New exhaust headers
New header catalytic converters
New sports exhaust system with electronic programmable butterfly-valve control (available in 2 different sound levels). This cat-back performance exhaust system was developed on the dyno. The result is a power increase of 19 kW (25 hp) and a 30 Nm (22 ft-lb) increase in torque. A deep sonorous tone and a weight reduction of 18 kg (40 lb) are additional benefits of this stainless steel exhaust system. Vehicle will be tested on dynamometer.

Engine Stage 3
Power increase to 770 hp/690 Nm (509 ft-lb), V-max > 365 km/h (227 mph)

6.0 Ltr. engine block
4 new camshafts in exchange
10 new 6.0 Ltr. pistons
Modified intake system
High flow air filters
ECU recalibration
Modified cylinder heads
New exhaust headers
New header catalytic converters
New sports exhaust system with electronic programmable butterfly-valve control (available in 2 different sound levels). This cat-back performance exhaust system was developed on the dyno.

The result is a power increase of 19 kW (25 hp) and a 30 Nm (22 ft-lb) increase in torque. A deep sonorous tone and a weight reduction of 18 kg (40 lb) are additional benefits of this stainless steel exhaust system. Vehicle will be tested on dynamometer

Suspension

The 3-way adjustable edo/KW Competition shock absorbers and sports suspension systems are designed for motorsports. For our 3-way adjustable shock absorbers we employ gas mono-tube shocks that are adjustable for compression and rebound (separate adjustments for low-/high- speed compression damping) and that feature a remote oil reservoir. The damping forces can be adjusted individually. Optionally we offer an electro-hydraulic nose lift system.

Brakes

edo competition high-performance brake pad set for ceramic rotors

Wheels

New wheel design: Set of 18 in. forged wheels with Michelin Pilot Sport Cup

Front: 265/35 18, Rear: 345/35 18, with polished stainless steel outer rims and forged high strength aluminium inner rims

Aerodynamics

Carbon-fiber rear wing profile produces downforce for increased stability

Interior

Recaro leather sport seats, 6-point harnessesAll these modifications are performed at our headquarters in Ahlen/Germany only!


[Source: Edo competition]



47
Vote
   


charles's Blogs

47455 Vote(s)
847 Comment(s)
687 Post(s)
1126 Vote(s)
48 Comment(s)
10 Post(s)
0 Vote(s)
0 Comment(s)
0 Post(s)
0 Vote(s)
0 Comment(s)
0 Post(s)
Moderated by charles
Copyright © 2006 2007 2008 On Topic Media PTY LTD. All Rights Reserved. Design by Vimu.com.
On Topic Media ZPages: Sydney |  Melbourne |  Brisbane |  London |  Birmingham |  Leeds     [ Advertise ] [ Contact Us ] [ Privacy Policy ]